Mircom Connected City

FX-3500

Mircom
Mircom
FX-3500

FX-3500

Mircom’s FX-3500 Series systems are powerful intelligent fire / agent release control panels that are UL/ULC listed.

Contact Mircom

By Phone

Canada: 1-888-660-4655
USA: 1-888-660-4655
International: 1-905-660-4655

Long Description

Mircom’s FX-3500 Series systems are powerful Intelligent Fire / Agent Release Control Units that are UL/ULC listed for fire alarm services, including releasing service.

The FX-3500 Series provides up to three intelligent Data Communication Links (DCLs) / Signaling Line Circuits (SLCs) that support a new AP protocol, which is faster and has capacity for up to 954 intelligent devices.

In addition, the FX-3500 Series has backward compatibility support for CLIP devices. The FX-3500 Series systems are recommended for both new and retrofit fire detection and/or special-hazard/critical-infrastructure suppression/special agent applications.

Capable of releasing up to six discrete physical hazard zones, the FX-3500 offers exceptional value for complex installations.

Elegant configuration options by onsite laptop, or when required by the Engineer of Record, by remote PC via modem, the FX-3500 can be operational with minimal set up time.

Typically these environments require agent-based suppression solutions easily managed by the FX-3500 Intelligent Addressable Release Control Unit.

Agency Listings

UL
ULC
FM
CSFM

Features

Intelligent addressable fire alarm with releasing control.

General Benefits
  • New fast AP protocol, extending number of devices on the loops, up to 954 (318 X3)
  • Panel supports both AP and CLIP protocol
  • Uses USB key for enhanced security
  • Utilizing cross-zoning or counting detection
  • Flush or Surface mountable with no additional hardware required
  • Utilizes the universal Mircom enclosure
  • The FX-3500 Series RCUs are fully expandable to meet the demanding requirements for mission critical facilities, both inside the high value asset areas and also in the office environments
Hardware Features
  • One onboard SLC/DCL communication circuit that supports up to 318 addressable devices/points
  • Expandable to three SLC/DCL communication circuits that supports up to 954 addressable devices/points
  • Reliable and industry proven dedicated releasing power supply
  • Six dedicated hazard zone LED indicators
  • Convenient USB Programming port
  • Built-in UDACT/DACT for remote monitoring
  • Enhanced tactile response for operator interface
  • 4 x 20 character Liquid Crystal Display (LCD)
  • Easy to read numerical keypad
  • 10 Ampere (Amp.) Power Supply to satisfy typical releasing load requirements
  • Four Class A/B Notification Appliance Circuits (NAC) rated at 1.5Amp. each
  • SLC is capable of NFPA 72 Style 4, Style 6, or Style 7 wiring & ULC’s DCL-A & DCL-B
  • Resettable auxiliary power supply
  • Four easy to read status queues with selector switches and LEDs for Alarm, Supervisory, Trouble and Building Safety (Formerly Monitor) Input visual indications
  • Supports up to seven remote annunciators
  • Accessible multifunction RS-232 port for:
    • Audio Interface
    • Serial Communication interface
  • RS-485 Interface for remote LCD/LED Annunciators and other devices
  • Optional City Tie/Polarity Reversal module for central station monitoring
  • Cross-zoned or Counting Zone Smoke Detection programming to enable release by either counting active zone detection circuits or active cross-zoned detection circuits (includes options for single, double, triple and 2 different inputs counting zones)
Software and Operational Features
  • Audible alarm response within three seconds of activation in Advanced Protocol mode (when using AP devices only);
  • AP is a completely digital protocol
  • AP is an Interrupt base protocol
  • Individual LED Control
  • Releasing capability for up to 6 Zones
  • Supports Pre-Action/Agent Release and Deluge Applications
  • Supports up to 3 SLC loops and 954 points
  • Supports CLIP and AP System Sensor protocols
  • Built-in strobe synchronization support for Mircom, Potter/Amseco, System Sensor, Gentex and Wheelock protocols
  • Grouped inputs and outputs
  • NACs can be configured as Silenceable or Non-Silenceable for both signals and strobes
  • Group bypass with built-in false alarm prevention technology
  • Zone Counting
  • Built-in Drift Compensation for AP protocol
  • Positive Alarm Sequence
  • Configurable Signal Silence Inhibit, Auto Signal Silence, Two Stage Operation and One-Man Walk Test
  • Relay contacts for Common Alarm, Auxiliary/Alarm (Disconnectable), Common Supervisory and Common Trouble
  • Two event history logs comprised of a 400 event alarm log for alarm related events and a 400 event general log for all other events
Mechanical Features
  • The FX-3500 supports both flush and surface mount applications
  • Dimensions 26” x 14.5” x 4.2”
    66 cm x 36 cm x 11 cm
  • Modular display placement options
  • Fits up to 2, 18 Ampere Hour batteries
  • Durable CAT-30 lock and key
  • Removable enclosure door
  • Easy access to all modules for serviceability
Additional Features
  • Compatible with INX-10A Addressable Intelligent NAC Expander Panel
  • Supports Acclimate smoke detection sensors

Support

Phone: 905-660-4655 (Extension 3)

Select a document from the list below.


Sales Collateral

Product Specifications (Datasheets / Product Sheets / Cut Sheets)

Manuals

Engineering Specifications

CAD & Revit Drawings

Software

To access configurators and software you must login.




Perfect for Condominiums

Mircom intelligent fire solutions have been installed in condominiums, apartments and athlete residences around the world. Read this case study that show our products being used in the Pan-Am / Parapan Am Games athlete residences.

Get Your Case Study


Copyright MAXXmarketing Webdesigner GmbH