The TXTOUCH 22” screen keeps going black, where no image is present on the screen with exception to the Mouse marker?

TX3-TOUCH screen is not receiving enough power caused by the following:

  • The voltage, at the TX3-TOUCH input is below voltage. Verify if you are feeding 24 VDC to the TX3-TOUCH;
  • The 120VAC power feed to the power module is reversed. Change out the power module and ensure that that the hot of 120VAC is properly tide the right side; and
  • TX3-TOUCH’s power module is damaged from generator testing. Replace the power module and protect the TX3-TOUCH by installing a UPS.

Was this answer helpful to you?


Yes (0)    No (1)

Thank you! We will use your feedback to improve our frequently asked questions.
Thank you! We will use your feedback to improve our frequently asked questions.

Please contact Technical Support directly if you need further assistance.




GO BACK