How do I configure the configurator for remote connect to a card reader?

  • Ensure that the Card Access panel has a TX3-IP module board installed on the main control board;
  • Connect the panel to the network;
  • Port forward the panel’s IP address and Port :14000-14003 for that panel within the router (must enable both TCP & UDP);
  • Write DNS_name/Router’s global IP address: ”External Port” within the IP address field For more, please see Instruction Manual

Was this answer helpful to you?


Yes (0)    No (0)

Thank you! We will use your feedback to improve our frequently asked questions.
Thank you! We will use your feedback to improve our frequently asked questions.

Please contact Technical Support directly if you need further assistance.




GO BACK