Mircom Products Fire Speakers & Speakers/ Strobes SPS Series 4" Speaker/Strobes

SPS Series 4" Speaker/Strobes
SPS Series 4
View Full Image

• 25 & 70 Volt line matching transformers
• DC blocking capacitor for line supervision
• Output power taps of ¼, ½, 1, and 2 watts
• Terminal block connection for speaker tap/output selection
• ULC listed for Wall or Ceiling mount
• Fire retardant cone material
• Strobe with two field selectable settings 15/75 or 30/120cd
• Polarized strobes with wide listed voltage ranges using filtered DC or unfiltered FWR input voltage
• Tamper-proof candela selector switch
• Strobe synchronization requires an SDM-240 Sync Module
• Round or square baffles
•Available in a white housing

Specification

Order Information
SPS-104A-25
4” Round Speaker, 25 Volt with Select-A-Strobe, White 15/75 or 30/120 Strobe Candela
SPS-104A-70
4” Round Speaker, 70 Volt with Select-A-Strobe, White 15/75 or 30/120 Strobe Candela
SPS-204A-25
4” Square Speaker, 25 Volt with Select-A-Strobe, White 15/75 or 30/120 Strobe Candela
SPS-204A-70
4” Square Speaker, 70 Volt with Select-A-Strobe, White 15/75 or 30/120 Strobe Candela
IB-104
4” Flush Backbox for Round Speakers
IB-204
4” Flush Backbox for Square Speakers
IB-404
4” Surface Backbox for Square Speakers
SDM-240
Series 200 Select-A-Horn/Strobe Sync. Module

Literature
SPS Series 4 Inch SpeakerStrobes

Sales

Canada

Tel: (888) 660-4655
Fax: (888) 660-4113
Email

USA

Tel: (888) 660-4655
Fax: (888) 660-4113
Email

International

Tel: +1(905) 660-4655
Fax: +1(905) 660-4113
Email

Support

An installation manual has not been published for this product. Please reference the product Data Sheet for guidance for general installation. For more information, please contact Mircom Technical Support.

Phone: 1-888-660-4655            E Mail: Click Here

Service Tools

Click Here
For complete listing of all Mircom Software/Firmware Updates

Click Here
For ESD Section

Click Here
If you forgot your password for ESD Section

Click Here
If you would like to apply for access to ESD Section or to apply for Training